3
IM AQ6376-02EN
Checking the Contents of the Package
After opening the package, check the following items before beginning use. If any of the
contents are incorrect, missing, or appear to be abnormal, please contact your Yokogawa
dealer or representative.
AQ6376 Main Unit
Check that the model and suffix code on the name plate on the rear of the instrument
match those of your order. When contacting the dealer from which you purchased the
instrument, please give them the instrument number.
MODEL
Suffix Code
2
Description
AQ6376
Optical Spectrum Analyzer AQ6376
Specification
-10
Standard Model
Built-in light
-L1
Wavelength reference source
source
Power cord
1
-D
UL/CSA standard and PSE compliant, Rated voltage: 125 V
-F
VDE/Korean standard, Rated voltage: 250 V
-R
Australian standard, Rated voltage: 250 V
-Q
British standard, Rated voltage: 250 V
-H
Chinese standard, Rated voltage: 250 V
-N
Brazilian standard, Rated voltage: 250 V
-T
Taiwanese standard, Rated voltage: 125 V
-B
Indian standard, Rated voltage: 250 V
-U
IEC Plug Type B, Rated voltage: 250 V
-Y
No power cord included.
3
Options
/FC
AQ9447 (FC) Connector Adapter (for optical input)
4
/SC
AQ9447 (SC) Connector Adapter (for optical input)
4
/RFC
AQ9441 (FC) Connector Adapter (for calibration light source
output)
5
/RSC
AQ9441 (SC) Connector Adapter (for calibration light source
output)
5
1 Make sure that the attached power cord meets the designated standards of the country and
area that you are using it in.
2 For products whose suffix code contains “Z,” an exclusive manual may be included. Please
read it along with the standard manual.
3 Prepare a power cord that complies with the standard specified by the country or region that
the instrument will be used in.
4 Already attached to the optical input of the AQ6376 front panel.
5 Already attached to the calibration light source output of the AQ6376 front panel.
• No. (Instrument Number)
Please contact your nearest Yokogawa representative.
