manualshive.com logo in svg

YOKOGAWA AQ6375, Руководство по началу работы, Страница: 32 / 38

Поделиться
Скачать
YOKOGAWA AQ6375 Скачать руководство пользователя страница 32

32

IM AQ6375-02EN

Explanation

Screen when the instrument was not shut down

If the shutdown procedure was not performed after the previous session, the following 
message appears after start up. 
Failure to properly shut down the instrument can result in damage to the monochromator. 
When turning OFF the power, always perform the shut down procedure. 
Press any key to clear this message. 

 

 

 

Turning the Power OFF

1.

  Press the 

POWER 

switch on the front panel of the instrument. A shut down 

confirmation message is displayed along with the 

YES

 and 

NO

 soft keys. 

2.

  Press the 

YES

 soft key. The message, “AQ6375 is shutting down. Please wait...” 

appears, and shut-down begins. If you do not wish to shut down, press the 

NO

 

soft key. The screen returns to the original soft key menu. 

3.

  After the 

POWER 

switch changes from green to orange, turn OFF the 

MAIN 

POWER

 switch on the rear panel of the instrument. 

 

CAUTION

Do not cut the power to the instrument with the 

MAIN POWER 

switch on the rear 

panel when an operation is in progress. The operating system configuration file will 
not be backed up, possibly resulting in malfunctions upon start up the next time the 
instrument is turned ON. Always use the above procedure to shut down. 

8  Turning the Power ON/OFF

Содержание AQ6375







































Отзывы:

Нет отзывов