YOKOGAWA AQ6375 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 38

YOKOGAWA AQ6375 Скачать руководство пользователя страница 24

24

IM AQ6375-02EN

6

Attaching the Connector Adapter

Attach the optional connector adapter before using the instrument.

Note

A different connector adapter is used for OPTICAL INPUT and CALIBRATION OUTPUT. Make
sure not to use the wrong connector adapter.

Attachment Procedure

1.

Confirm that the power is OFF.

2.

Open the optical connector cover at the front of the instrument.

3.

Clean the ferrule edge of the optical I/O section using a swab soaked with a small

amount of pure alcohol.

4.

Insert the connector adapter all the way in.

5.

Push the connector adapter’s lock lever down.

The adapter has been attached correctly if the groove in the lock lever interlocks with the
latch pin of the optical input/output section.

Removal Procedure

1.

Confirm that the power is OFF.

2.

Turn the connector adapter’s lock lever up. The lock lever’s lock is released.

3.

Pull the connector adapter all the way out.

4.

Close the optical connector cover at the front of the instrument.

Panel

Lock lever

Ferrule

Latch pin

Optical input

section

Connector

adapter

Attached

CAUTION

• As there may be dust adhering to calibration output, be sure to clean it before

attaching the connector adapter.

• Do not exhale or blow compressed air into the monochromator from the optical

input. Doing so may allow dust or other materials to enter the monochromator,
adversely affecting its optical performance. Also, if debris is adhering to the
optical components inside the monochromator when a strong light source is
input, the monochromator may be damaged.

• When attaching or removing the connector adapter, carefully insert it

perpendicularly to the ferrule so as not to damage the ferrule end.

• Moving the connector adapter to the right or left or inserting it forcefully can

damage the ferrule or the connector adapter.

«
...
22
23
24
25
26
...
»

Содержание AQ6375







































Отзывы:

Нет отзывов