15
IM AQ6373B-02EN
Preparing to Turn ON the Power
The AQ6373B has a
MAIN POWER
switch for turning the main power ON/OFF, and a
POWER
switch for starting and shutting down the instrument.
The POWER
switch is a
push-button switch; press once to turn it ON and press again to turn it OFF.
• Confirm that the
MAIN POWER
switch on the rear panel of the instrument is OFF.
• Connect the power cord plug to the power connector on the rear panel.
• Connect the other end of the cord to an outlet that meets the following conditions. Use
a grounded three-prong outlet.
Item
Rated supply voltage*
100 VAC to 240 VAC
Permitted supply voltage range
90 VAC to 264 VAC
Rated power supply frequency
50/60 Hz
Permitted supply frequency range
48 Hz to 63 Hz
Maximum power consumption
Approx. 100 VA
* This instrument can use a 100 V or a 200 V power supply. The maximum rated voltage differs
according to the type of power cord. Check that the voltage supplied to the instrument is less
than or equal to the maximum rated voltage of the power cord that you will be using before
use.
Power On and Screen Display
CAUTION
Do not input a strong light source to the instrument when turning the power ON. If a
strong light source is input, the optical section can be damaged.
French
ATTENTION
Ne connectez pas une source de lumière puissante à l’instrument lorsque vous
mettez l’alimentation sous tension, cela risquerait d’endommager la section
optique.
1.
Connect the power cord to the power cord connector on the back side of the
instrument.
AQ6373B-02, -12
AQ6373B-01, -10
Three-prong outlet
Power cord
7 Turning the Power ON/OFF
