<5. Basic Operating Procedures>
11
IM 01E21A01-03EN-A
5.9 F
OUNDATION
fieldbus Configuration Tool
(Not applicable for EtherNet/IP communication type. Please read the descriptions on IM 01E22A01-01EN if
necessary.)
5.10
EtherNet/IP Configuration Tool
The Ethernet configuration can connect with this product
from any connection point of RJ-45.
Port 1 and/or Port2 can be used for plant operation and
maintenance of Ethernet communication.
F0514.ai
10
/
100Mbps
PORT2
PORT1
10
/
100Mbps
PORT1
PORT2
PORT1 Link
/
Activity
PORT2 Link
/
Activity
Module Status
Network Status
MX
Terminal Configuration
NOTE
For maintenance (temporary connection) purpose,
connect RJ-45 Ethernet cable without passing though
the cable hole of device.
Web page can be used for configuration of EtherNet/IP
device. See IM 01E21A02-06EN for details.
Supported software
Operation systems
Microsoft Windows 7 or higher
Web browser
Internet explorer 8 or higher
Google chrome
Microsoft Edge
Product code/name and EDS file for EtherNet/IP
EDS file is required to connect host application tool for
EtherNet/IP (e.g. PLC). If EDS is not installed in the host
tool, download the correct EDS file from ODVA official
web site and install it, or contact respective vendor of the
host tool.
EDS file is separated by the Product code/name. Confirm
the following table to install the correct EDS file.
AXG4A
Vendor ID
250
Vendor Name
Yokogawa Electric Corporation
Product Code
201
Product Name
AXG4A Magnetic Flowmeter
