background image

4

IM 701934-01E

Precautions

Please heed the following warnings and cautions to ensure safe use of the 
instrument and to obtain maximum performance. 

 WARNING

Use the Correct Power Cord and Plug

To prevent the possibility of electric shock or fire, be sure to use the power 
cord for the instrument. The main power plug must be plugged into an 
outlet with a protective earth terminal. Do not invalidate this protection by 
using an extension cord without protective earth grounding. Further, do not 
use this power cord with other instruments.

Connect the Protective Ground Terminal

Be sure to connect the protective earth to prevent electric shock before 
turning ON the power. The power cord that you can use for the instrument 
is a three-prong cord. Connect the power cord to a properly grounded 
three-prong outlet. 

 CAUTION

•  Do not expose the instrument to vibration or physical shock during 

shipping and handling. Take particular caution never to drop the 
instrument. 

•  Avoid storing or using the instrument in locations that are exposed to 

direct sunlight, high temperatures, or condensation. These conditions 
can result in deformation, discoloring, or other changes causing failure 
to meet product specifications.

•  Before using the instrument, please perform an inspection and 

operational test to check for any damage that may have occurred due to 
improper storage or shipping. If damage is found, contact your nearest 
dealer or Yokogawa representative. 

•  Nothing should be placed on top of the power cord, and it should be kept 

away from any heat sources. When removing the plug from the power 
outlet, do not pull on the cord. Pull from the plug. If the power cord is 
damaged or if you are using the instrument in a location where the power 
supply specifications are different, purchase a power cord that matches 
the specifications of the region that the instrument will be used in.

•  This instrument is not waterproof or dustproof. Do not use the instrument 

in locations with a large amount of water or dust. 

•  To clean the instrument, wipe using a soft cloth with a small amount of 

water or mild detergent. Never use detergents that contain benzene, 
alcohol, acetone, ethyl compounds, ketones, thinner, or gasoline as 
deformation or discoloration can result. 

Safety Precautions

Содержание 701934












Отзывы: