9
IM 701934-01E
Product Overview
This instrument is a power supply for probes.
Four power supply receptacles are located on the front panel, allowing
simultaneous powering of up to four probes.
Names of Parts
Front view
Rear view
Power switch
Power ON
Power OFF
Power cord
inlet
Grounding
terminal
Power receptacles
Power indicator
POWER
OUTPUT
PROBE 1
PROBE 2
PROBE 4
PROBE 3
Operating Procedure
Preparation
CAUTION
Before turning on the power, make sure that the power supply voltage
indicated on the back of the instrument matches that of the power outlet
you are using.
French
ATTENTION
Avant la mise sous tension, assurez-vous que la tension de l’alimentation
utilisée corresponde à la tension indiquée sur le panneau arrière de
l’appareil.
1
Turn the power switch OFF, then connect the power cord.
2
Connect the power plug of the DL series wide bandwidth current probe
you are using to a power receptacle on the instrument.
3
Turn ON the power switch, and confirm that the power indicator on the
front panel illuminates.
Performing Measurement
Refer to the user’s manual of the current probe you are using (model 700937,
701930, 701931, 701932 or 701933).
