When the measured temperature exceeds the High Limit value, the alarm LED blinks in red and
buzzer (high tone) sounds.
[Setting "High Limit Temperature for Alarm"]
q
Enter the setting mode for "High Limit Temperature for Alarm"
according to the procedure described in page 11. The initial
setting is at 500 ˚C.
w
Press
�
or
�
button in the detailed setting mode to change
the temperature vale, which your need alarm at.
e
Press SET/ENTER button to set the displayed value as the
High Limit Temperature for Alarm.
Note: The "High Limit Temperature for Alarm" cannot be set
at lower temperature than "Low Limit Temperature for
Alarm".
[Turning ON/OFF Alarm Function]
q
When the High Limit Temperature setting is completed, the
setting mode for ON/OFF Alarm Function appears. Press
.
�
or
�
button to select ON or OFF.
w
Press SET/ENTER button to set ON or OFF. While the Alarm
function is OFF, the Alarm function does not work even if the
measuring temperature goes higher than a preset level.
Setting mode for
"High Limit Temperature for Alarm"
(Initial setting: 500 ˚C)
Setting
–– "High Limit Temperature for Alarm"
12
Changing the temperature value to 200
˚C by using
�
/
�
button.
Setting the temperature value with
SET/ENTER button.
Alarm function: ON
Alarm function: OFF
53008-E 12.5.12 1:12 PM ページ 11
