YOKOGAWA 320110, Руководство пользователя

Страница: 4 / 24

— ii —
IM 3201–E

Measurement
· Do not apply a voltage or current over the allowable limits between the
terminals.
· Do not apply a voltage to the measuring terminals when measuring DC
currents (DC mA).

Power source of measured objects
· A voltage may be applied to metals or wires that are connected to electrical
equipments. Connect the measuring terminals after confirming that a voltage
has not been applied, and the same applied to the grounding systems.

Battery
· If the instrument is not used for a long period, store it with the battery removed.
Otherwise, any leakage from the battery may damage the instrument.

To avoid the risk of injury to personnel including electrical shock or damage to the
instrument, carefully observe and follow the instructions listed below.
Notice Regarding This Instruction Manual
1. The contents of this instruction manual are subject to change without prior notice.
2. All rights are reserved by Yokogawa. No one is allowed to make copies of, reprint
any part or all the contents of this instruction manual without permission from
Yokogawa.
3. If any questions arise or errors are found, or if any information is missing out from
this manual, please inform us.
4. Yokogawa is by no means liable for any damage resulting from the misuse of this
product by the user.
CAUTION
CAUTION
· To avoid deterioration or damage to the circuit components, keep out of direct
sunlight and do not use or store the instrument in locations subject to high
temperature and high humidity including inside vehicles.
· Both sides of the front cover of the tester have been treated with antistatic coating.
Use of a wet cloth for wiping the cover shall be avoided since it degrades the
coating. Wipe softly with a dry sheet if the cover gets dirty. Use of volatile solutions
such as thinner, benzine, or other chemicals shall also be avoided.
· The case and the tester cover are made of thermoplastic resin. Keep the
instrument away from any high temperature heat source (e.g. a soldering iron).