Yoer MG01S GRINDO Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 24

Yoer MG01S GRINDO Скачать руководство пользователя страница 15

ENGLISH

15

CONTROL SWITCH

“OFF” position – the device is turned off

“1” position – low speed

“2” position – high speed

“REV” position – reverse

TECHNICAL SPECIFICATION

Nominal power

800W

Locking power

1900W

Voltage / Frequency

220-240V~ 50/60Hz

USING THE DEVICE

Wash the device and its accessories thoroughly before first use.

IMPORTANT:



Use the device for a maximum of 5 minutes at a time. Allow the unit to cool down for 10 minutes between
each 5-minute use.



The grinding chamber auger is larger than the juicer auger, and is equipped with an aluminum clutch
at its end.



If the unit clogs up during operation, set the switch in the “REV” position until the grinding chamber
clears.



If it becomes noticeably difficult for the device to grind, shred or juice products, set the switch
in the “2” position to increase power.



The supplied lid can be used as a bowl for prepared products.



A groove for the power cord is located at the bottom of the grinder body. While setting it down, make
sure the cord is placed in the groove because, if positioned improperly, it will make it impossible for the
grinder to be set in a stable position.



The power cord can be stored on the cord roller located at the bottom of the grinder after use.

CAUTION

DO NOT PUT FINGERS OR ANY OTHER BODY PARTS INTO THE GRINDING
CHAMBER,  OUTLET  PORT,  OR  ANY  OTHER  OPENINGS  ON  THE  DEVICE
OR INSTALLED ACCESSORIES DURING OPERATION, OR WHEN THE DEVICE
IS TURNED OFF BUT REMAINS PLUGGED IN,  BECAUSE IT MIGHT CAUSE
SERIOUS  BODILY  HARM.  USE  THE  SUPPLIED  FOOD  PUSHERS  TO  FEED
PRODUCTS INTO THE CHAMBERS.

«
...
13
14
15
16
17
...
»

Содержание MG01S GRINDO

























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды