Yoer GLOSSO CH03, Руководство пользователя

Страница: 16 / 20

ENGLISH
16
USING THE DEVICE
• Upon plugging in the heater will enter standby mode.
• Press the
button to turn the heater on. If set temperature is higher than current room temperature,
the device will engage heating.
• Press the
button to select operation mode:
eco mode
– uses half of the heater’s power
comfort mode
– uses all of the heater’s power
antifreeze mode
– Prevents cold rooms freezing over
• When the heater is on, use the „<” and „>” buttons to set temperature.
• To set the time after which the heater is to turn off, press the
button when the heater is turned on.
Select the number of hours in the 0-24h range by pressing the button until the desired time is reached.
While setting the time, the numbers will be blinking. To apply the setting wait for them to stop blinking
or press the button. A clock icon on the display indicates that the timer is active. To cancel it,
set the number of
hours to “0”, or turn the heater off.
• To set the time after which the heater is to turn on, enable the timer in the mobile app when the heater
is in standby mode. A clock icon on the display indicates that the timer is active. To cancel it, disable
the timer in the app or turn the heater on.
• To lock the control panel (child protection), press and hold the “
>”
button. An icon will appear
on the display and the heater will no longer react to button presses. To disengage the lock, press
and hold the
“<” button, until the padlock icon disappears.
• Press the
button to turn off the display.