ENGLISH
20
RESTORING FACTORY SETTINGS
To revert the amount of prepared coffee and/or frothed milk to factory settings:
1. Turn the espresso machine off.
2. While pressing and holding the espresso and double espresso buttons at the same time, turn
the device on.
3. The device will play several sound signals and the icons on the control panel will blink a few times.
Beverage amounts have been reset.
CLEANING AND MAINTENANCE
WARNING:
For the device to work properly, clean it after each use.
The portafilter and the water in the drip tray will be hot after use. Exercise caution to avoid burns.
After each use, remove the frother, slide out the drip tray, pour out the water and rinse it.
Never submerge the appliance in water.
CLEANING THE MILK RESERVOIR AND THE FROTHER NOZZLE
IMPORTANT:
Despite the fact, that the frother can be stored in a fridge, it should be regularly cleaned to prevent
clogging the nozzle and residue settling.
Do not use abrasive cleaning materials, as they may damage the reservoir. The reservoir may
also be safely placed in the top part of the dishwasher. Do not put frother lid and nozzle
in the dishwasher.
1. Remove the frother from the espresso machine
2. Remove the milk reservoir.
3. Pour the remaining milk from the reservoir and wash it and the nozzle with warm water and dish
soap. Rinse all the parts with warm water and dry them off.
4. To clean the internals of the frother fill the milk reservoir with water and mount the frother
in the espresso machine. Place a large cup underneath the frother nozzle.
5. Press the button, the frother will begin releasing steam through the nozzle. Wait for as long
as it takes for any milky residue to disappear. The functionality will cease operation after about 60
seconds. If you want to stop it sooner, press the button again.
6. Pour out any remaining water from the reservoir, dry it off and mount it back in the appliance.
CLEANING THE PORTAFILTER MOUNT, PORTAFILTER AND FILTERS
1. Turn the device off and unplug it.
2. Some metal parts may still be hot, do not touch them until they cool off.
3. Remove the portafilter and throw away the used-up coffee grounds. Wash the portafilter and filter
with warm water and dish soap. Rinse them thoroughly and dry them off. Do not wash them
in a dishwasher.
4. Wipe off any remaining coffee from the portafilter mount on the espresso machine. You may use
a damp cloth or a paper towel.
5. Install the portafilter (without a filter) in its mount.