
ENGLISH
19
SELECTING FUNCTIONALITIES AND PROGRAMMING
Before using the espresso machine, fill the water reservoir, and the milk reservoir if you want to prepare
cappuccino, latte or froth some milk. Fill the chosen filter with coffee and place it in the portafilter, plug
the device in and turn it on using the button. When the icons on the control panel cease blinking,
the device is ready to be used.
TIP:
In order to improve the quality of the beverage, place your cups upside down on the preheater
on top of the espresso machine before making coffee and wait a few minutes for them to get warm.
ESPRESSO
Press the button to prepare a single espresso, or the button to prepare a double espresso.
Programming:
1. To change the amount of prepared coffee, press and hold the button for the chosen
functionality.
2. After a few seconds, a sound signal will indicate that the programming process has begun.
3. Only release the button after the desired amount of beverage has been prepared.
You may program up to approx. 100 ml for a single espresso and approx. 200 ml for double espresso.
CAPPUCCINO AND LATTE
Direct the frother nozzle to the cup and press the button to prepare cappuccino, or the button
to prepare latte. Turn the frother adjustment knob to the right to increase foam volume, or to the left
to decrease it.
Programming:
TIP:
The programming process has to be carried out in both cases separately for the amount of milk
and the amount of coffee.
1. Press and hold the button for the chosen functionality.
2. After a few seconds, a sound signal will indicate that the programming process has begun.
3. Only release the button when the desired amount of frothed milk has been prepared.
4. As soon as the espresso machine begins pouring coffee, press and hold the button again.
5. After a few seconds, a sound signal will indicate that the programming process has begun.
6. Only release the button when the desired amount of coffee has been poured.
FROTHING MILK
Direct the frother nozzle to the cup and press the button to begin frothing milk.
Programming:
1. To change the amount of frothed milk, press and hold the button.
2. After a few seconds, a sound signal will indicate that the programming process has begun.
3. Only release the button when the desired amount of milk has been frothed.