20
Yoder YS 640
Startup Procedure
(When using the Yoder with the heat diffuser/drip plate in position, it is best to start
your grill 20 to 30 minutes prior to cooking. This allows the grill and cooking grates to
heat completely improving heat retention and recovery when opening the cover during
cooking.)
1. Confirm the power switch is in the “off” position.
2. Plug the female end of the cord in the receptacle on the back of the pellet hopper.
Plug the male end into a 120 volt, 15 amp GFCI-protected receptacle. If an extension
cord is required, see caution notes (Page 4).
3. Load the hopper with “food grade” pellets. DO NOT use heating grade pellets. The
hopper will hold 20 pounds of pellets allowing 5 to 13 hours of cooking depending on
cooking temperatures, ambient temperatures, wind condition and whether or not the
optional thermal jacket is installed.
4. Open the cooking chamber door.
5. Remove the cooking grates and heat diffuser/drip plate.
FIG 15
Содержание YS 640
Страница 1: ...OPERATION INSTRUCTIONS PELLET SMOKER YS 640 32 VERSION 8 3 December 2014...
Страница 39: ...38 Yoder YS 640 38 04 09 10 02 14 08 07 03 12 06 02 01 11 03 05 13 640 IGNITER AND THERMOCOUPLE COMPONENTS...
Страница 42: ...41 Yoder YS 640 41 04 12 01 14 12 08 07 03 13 02 09 10 14 13 11 06 05 640 CART...
Страница 44: ...43 Yoder YS 640 43 640 COMP CART 07 09 08 05 06 14 04 17 16 15 01 11 11 12 13 10 03 02...