19
Yoder YS 640
8. Reinstall the cooking grates and optional second shelf (See FIG 9).
9. Inspect chimney stack to be certain that the internal end of the stack is installed
even with the grill body.
10. Remove, inspect and clean the grease bucket as needed. Reinstall the grease
bucket under the right side of the grill.
11. Open the hopper lid and inspect for any foreign materials.
12. Continue to Start-up Procedure.
HEAT DIFFUSER/
DRIP PLATE
AUGER
SHIELD
END OF STACK FLUSH
WITH BODY.
END OF STACK FLUSH
WITH BODY.
7. Reinstall the heat diffuser/drip plate. The heat diffuser plate attaches to the hook on
the auger shield and rests on the grease divider on the right hand side of the grill. Once
installed, check to be certain that the edges are approximately one-quarter inch be-
low the grate rails at the hopper end and that the plate is adjusted evenly from front to
back. (The diffuser is angled toward the right side of the grill to channel grease into the
grease container.)
FIG 13
FIG 14
Содержание YS 640
Страница 1: ...OPERATION INSTRUCTIONS PELLET SMOKER YS 640 32 VERSION 8 3 December 2014...
Страница 39: ...38 Yoder YS 640 38 04 09 10 02 14 08 07 03 12 06 02 01 11 03 05 13 640 IGNITER AND THERMOCOUPLE COMPONENTS...
Страница 42: ...41 Yoder YS 640 41 04 12 01 14 12 08 07 03 13 02 09 10 14 13 11 06 05 640 CART...
Страница 44: ...43 Yoder YS 640 43 640 COMP CART 07 09 08 05 06 14 04 17 16 15 01 11 11 12 13 10 03 02...