10
yodersmokers.com
Step #8
Part G - Qty 2
Parts Required:
FIG 13
FIG 14
FIG 15
FIG 16
Part A4 - Qty 4 Part A5 - Qty 4
Using two of each A4 & A5, attach one part G to the stand assembly using only the bottom holes in stand
assembly. Install part G with diagonal corners on top, as shown below. Hand-tighten the nuts for now.
FIG 13/ FIG 14
Repeat Step# 8 to attach second part G to stand assembly. FIG 15
**Note: It may be necessary to lightly “bump” the tops of the legs outwards as shown below in order to
align the holes. FIG 16