YS 1500
16
3. Remove the burn grate from the firebox. Inspect and clean thoroughly. Make certain
that the combustion holes in the burn grate and the igniter tube in the firebox are
free of debris or ash build up. Visually inspect the air way between the combustion
fan and the firebox to be certain that it is free and clear of ash and debris. (A shop
vacuum works well for ash and debris removal.)
4. Inspect for and remove any grease build up on the bottom of the cooking chamber.
5. Inspect the silicone seal around the firebox, paying particular attention to the seal
above the firebox at the hopper wall. It will be necessary from time to time to reap-
ply high heat silicone such as Permatex 81878 in this area which insures proper
combustion and grill performance.
6. Reinstall the burn grate. Begin by resting the right hand side of the burn grate on
the firebox and then pressing down on the left hand side of the burn grate until fully
seated. When the burn grate is properly seated it rests firmly on the right hand side
of the firebox and fits close to the hopper wall. Finally, check that the igniter assem-
bly is centered in the respective hole in the burn grate.
FIREBOX
BURN
GRATE
BURN GRATE
RIGHT SIDE
FIRE BOX
BURN GRATE
RIGHT SIDE
IGNITER
FIRE BOX
FIG 10
FIG 11
Содержание YS 1500
Страница 1: ...OPERATION INSTRUCTIONS PELLET SMOKER YS 1500 42 VERSION 1 2 July 2014 ...
Страница 33: ...32 1500 COOKING COMPONENTS 02 07 12 14 04 06 07 13 01 09 11 14 10 05 04 03 04 08 ...
Страница 35: ...34 09 08 03 02 06 07 11 12 04 15 01 05 14 13 02 16 01 17 1500 IGNITER AND THERMOCOUPLER COMPONENTS ...
Страница 39: ...38 1500 COMP CART 06 10 07 15 05 12 09 03 04 01 03 02 14 09 08 08 14 11 11 13 ...