Yoder Smokers YS 1500, Руководство по эксплуатации, Страница: 10 / 43

YS 1500
9
START
PRIME
ON
OFF
INCREASE
DECREASE
Y S
YODER SMOKERS
C O M P E T I T I O N G R A D E B B Q P R O D U C T S
WWW.YODERSMOKERS.COM
1. Power Switch - turns the power to your Yoder on and off
2. Increase - increase the temperature setting (in five degree increments).
3. Decrease - decrease the temperature setting (in five degree increments).
4. Start - activates the startup cycle. This also accesses the “heat up” modes (see
below).
5. Prime - overrides the control system to manually feed pellets.
6. Power LED - lights up when the power switch is in the on position.
7. Display - provides information about how the grill is performing including: heat up
mode, cool down mode, maintenance mode, set temperature and actual tempera-
ture. Once the cooker exceeds 110°F. at start up the display alternates between the
cooker temperature and the operating mode.
The controller is adjustable from 150 to 600°F in five degree increments. The controller
displays the actual pit temperature when the set point is from 150 to 495°F. When the
controller is set over 500° F the controller will display the set point.
To access the “heat up” modes once the Yoder is running press and hold the start but-
ton until the current heat up mode is displayed. Use the increase/decrease buttons to
toggle between H1, H2 or H3.
Operating mode indicators: Heat up mode (FIG 5) is displayed by three dashing lines
from lower left to upper right. Maintenance mode (FIG 6) is displayed by three horizon-
tal lines. Cool down mode (FIG 7) is displayed by three dashing lines from the upper
left to the lower right.
NOTE: For startup in temperatures below 50 degrees see Page 13.
Yoder YS Series Control Panel