YMGI • Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
40
How to Clean the Air intake
1.
Open the air intake grille and use a Phillip’s head
screwdriver to remove the two screws.
Slide both knobs simultaneously towards center
as shown and then pull them downward slowly.
2. Remove the air filters.
Slide knobs on the back of the air intake grille
outward and remove the air filter.
Then remove three air filters on it.
3. Open the grille at a 45 Degree angle and then lift,
it up to take away.
4. Wash with water.
When the air intake grille is very dirty, use soft
brush and neutral detergent. Shake off water and
air dry in a shady place.
Attention:
Do not wash with hot water.
5. Replace the air filter.
6. Replace the grille
7. Close
t
he suction grille
NOTE:
Never use water hotter than 113°F to wash the unit or the filters as this can discolor and/or deform the unit. Never dry the
filters by a fire or open flame as this can be dangerous. Always air dry the filters.
Before Starting the Unit for the First Time in the Season
1. Check to make sure no objects obstructing the
intakes and outlets on both the indoor and outdoor
units.
2. Check to make sure ground wire is connected and
that it is not damaged.
3. Check to make sure air filter has been cleaned.
4. Turn on the power 6 hours before starting the air
conditioner.
End of Season Cleaning
1. Turn off power.
2. Clean the filter and the body of the unit.
3. Clear any dust.
4. If there is any rust deep inside the outdoor unit,
may need to use an extended head cleaning tool.
