YMGI
Your Modern Green Idea
5
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [email protected] • ymgigroup.com • 866-833-3138
Remote Controller
Turning On
Press once to turn the system on or off. Indoor Unit Display will light
up when On.
Notes:
• During operation, a unit may take a few moments to switch modes.
Wait at least 3 minutes between Mode changes.
• In HEAT Mode, the unit will not blow air when powered on. Preheating
can take 2-5 minutes before the unit begin blowing warm air.
• When restarting the unit, wait 3 minutes for it to resume operation.
Selecting Mode
Each time MODE button is pressed, the operation mode is changed in the
following sequence:
Heating mode is NOT available for cooling only air conditioners.
Fan Mode
Each time the FAN button is pressed, the fan speed is changed it the following sequence:
• In FAN ONLY mode, AUTO is not available.
• In DRY mode, fan speed is set to AUTO automatically. FAN button is not adjustable in DRY mode.
Setting Temperature
Press once to raise the set temperature 1°F (1°C)
Press once to lower the set temperature 1°F (1°C)
Available Temperature Ranges
Mode
Range
HEATING, COOLING
61°F ~ 86°F (16°C-30°C)
DRY (Dehumidify)
-7°F ~7°F
FAN
Not Available
Notes:
• Press and hold MODE and
for 3 seconds to change temperature display between °F to °C
• HEATING Mode is not available on Cooling Only models.
• In DRY Mode, the unit can decrease or increase 7 °F above or below the temperature set on the
remote controller.
