YMGI
Your Modern Green Idea
7
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • info@ymgigroup.com • ymgigroup.com • 866-833-3138
Remote Controller
Smart Mode
By pressing the SMART button, the unit will enter SMART mode (a fuzzy logic operation) whether the
unit is ON or OFF. In this mode, the temperature and fan speed are automatically set based on the
current room temperature.
Operation MODE and Temperature are determined by the indoor room temperature
Heat Pump Models
Indoor Temperature
Operation Mode
Target Temperature
70°F (21°C) or below
HEATING
72°F (22°C)
70°F~73°F
(21°C~23°C) or below
FAN
73°F~79°F (
23°C~26°C)
DRY
Room temperature decrease 2°F
after operating for 3 minutes
Over 79°F (26°C) or below
COOLING
79°F (26°C)
Cooling Only Models
Indoor Temperature
Operation Mode
Target Temperature
73°F (23°C) or below
FAN
72°F (22°C)
73°F~79°F
(23°C~26°C) or below
DRY
Room temperature decrease 2°F
after operating for 3 minutes
Over 79°F (26°C)
COOLING
79°F (26°C)
• SMART button is inoperable in SUPER Mode.
• Press the MODE button to cancel SMART Mode.
• Temperature, airflow, and direction are controlled automatically in SMART mode. However, for the
invertor you can adjust -7°~7° if you still feel uncomfortable.
What you can do in SMART Mode
Your Comfort
Button
Adjustment
Uncomfortable because of
amount of air flow.
Indoor fan speed alternates between Highest,
High, Medium, Low, and Lowest each time this
button is pressed.
Uncomfortable because of air
flow direction
Press the desired SWING button once. The ver-
tical adjustment louver will swing to alternate the
air flow direction.
Press the button again, and the swing will stop.
For horizontal airflow direction, please refer to
the previous page for details.