YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
26
To start operation:
Push button I/O button to turn the system on.
To stop operation:
Push I/O button to turn the system off.
To adjust the temperature:
Push the + or
– button to raise or lower the temperature.
You can change the temperature display from Celsius to Fahrenheit by turning the
remote off, and pressing both the Mode and
– buttons simultaneously.
MODES.
Push the MODE button
to change the system’s operation. The mode sequence is:
AUTO
→ COOL → DRY (Dehumidify) → HEAT → FAN.
Automatic Operation:
A comfortable room temperature will be reached automatically and economically as
the preset control system will adjust the operation mode in accordance with the real
room conditions.
You can select your desired temperature, fan speed, and fan direction by using the
remote co
ntrol’s buttons.
To protect the compressor, the automatic time-lapse protection is possessed. If the
compressor stops running, you will need to wait at least 3 minutes before restarting.
When the outdoor temperature is very low, the Outdoor Unit’s heat exchanger is susceptible to frosting. This may affect
heating performance. If the LED indicator flashes, and the Indoor Unit fan motor stops, it has entered defrost mode. Once
the unit has defrosted, it will resume normal heating operation automatically.
Manual Control
Using Manual Control for cooling, dehumidification of heating operation:
Push
I/O
button.
Select the operation mode
Push
MODE
to select operation mode.
The operating mode sequence is:
Automatic
→ Cooling → Dehumidification → Heating
To stop operation”
Push
I/O
button
All settings will be stored when you power the system on later.
To change temperature setting:
Push
+
button to increase the temperature. The setting will be increased by 1°C/°F each time when you press the
button.
Push
-
button to decrease the temperature. The setting will be decreased by 1°C/°F each time when you press
the button once.
