www.yli.cn
We create security
2
1
2
1
THE COMMENTARY OF HOLES
A:The Solid Door
B:The Hollow Door
Lock
The hole of screws
The hole of screws
Armature
Installation drawing
C:Use The Extended Plate
THE COMMENTARY OF INSTALLATION
Step1:Confirm the position of installation
It can be installed upon the door or the side of the door
Step2:Paste the sticker
Note:Adjust the sticker to assuer the proper alignment
Step3:Drill the hole
Drill the hole according to the sticker,and drill the hole
for the LED on the door frame.
Step4:Wiring
Install the led on the door frame, and connect the 9pin
Step5:Fix the magnetic lock and armature
Connect all the wire to the shear shear lock body,
then adjust the delay time,then fix the magnetic
lock and armature
Step6:Connect the electricity and adjust
Check the operation is correct or not when
connecting electricity,please adjust a little
the armature when they can`t adsorb
Door frame
Door leaf drill
the hole for LED
Install the LED
Adjust up or down
Adjust left or right
The hole of screws
The hole of screws
Lock
Armature
Installation drawing
Door frame
Door frame
