www.yli.cn
We create security
Extended
operation
Add personalAccess
Password
#ProgrammingPassword#22NEW
password#
Can set up multiple sets of
personal
password:Accessedby
Password,input password
then press#
Add User Card(input Card
Number)
#ProgrammingPassword#23#Manual
inputinitialcard number
The Card Number can be
the 10 digits in the blank
spaceon the left side of the
Card or the 8 digits on the
right side of the card,the
machine identify automatic
Add UserCard(Continual
CardNumber)
#ProgrammingPassword#23#Manual
inputinitialcard number Card
Quantity#
The Card quantity must be
4 digits(input 0020 can add
20 cardsat one-time)
Add
”
Card+Password
”
User
#Programming Password#3ReadCard
NEW password#
Modify the corresponding
password, please refer to
the instruction of modifying
corresponding personal
Access password
DeleteUser(inputID No.)
#Programming Password#42User ID
The UserID must be 4
digits,for example
0001,0020,etc.Details
shownin User ID
Instruction
Delete User(input Card
No.)
#Programming Password#43 Manual
input card number
Delete User(input
password)
Delete all Password User
#Programming Password#45 1111#
Modify Relay unlocking
time
Set the open mode
#Programming Password# 6 x x #
Cardreaderfunction
#ProgrammingPassword#604#
“xx”can be 01(Read
Card);02(Read Card or
Password);or
03(Card+Password)
Read card under this
Mode ,WG Interface will
output WG26 Signal,this
product can be used as
Card reader(only apply to
some models)
Set Security Function
#Programming Password#7xx#
“xx”can be 01 or
02(Security feature Close
/Open)/03 or 04(Tamper
alarm Close/Open)(only
apply to some models)
Set Backlight Mode
#Programming Password#8xx#
xx”can be 01(Light
NC)/02(light
NO)/03(Auto)(only apply to
some models)
Resetmachinefactory
Settings
#Programming Password#899#
All machineparameterswill
be restoreto Factory
default
The Card Number can be
the 10 digits in the blank
space on the left side of the
Card or the 8 digits on the
right side of the card,the
machine identify automatic
#Programming Password#44 Personal
Access password#
Delete the corresponding
User of this card ,and the
corresponding Card number
of this password will be
delete as well
All the User that only
accessed by personal
Password will be delete
#Programming Password# 5 x x#
“xx is 2 digits,Up to 99
seconds,if input 00,the
Relay signal Instantaneous
output(0.2sec)
