YitaHome HNXD-V1, Руководство по сборке

Страница: 7 / 9

7.Date and Clock Settings:
(1)Upon initial power-up, the year, month, and day are set to 00-01-01, and the
time is set to 00-00, with Monday being the first day of the week.
(2)While in sleep mode, press the "*" key to access the time settings. The display
screen will show the year, month, and day as 00-01-01, and they will be flashing.
At this point, you can directly input the numbers sequentially to change the
current time. After inputting, wait for three seconds for an automatic transition
back to sleep mode, with the set time displayed.
(3)(Note: When setting the hour, the tens digit of the hour will appear as shown in
the icon below, indicating that the tens digit of the hour is 0.)
8.Door Access Records Inquiry:
(1)To inquire about door access records, enter the correct password to unlock the
door. Once the "open" message disappears from the display, press the "0" key
once.
(2)The display will show the time of the previous door access, beginning with the
date, followed by the time, and then indicating which type of password was
used for access.
"PASS1" indicates access using the personal password.
"PASS2" indicates access using the management password.
(3)While the "PASS1" or "PASS2" message on the display is still visible, press the
"0" key again to view the last door access record. Repeat this process to access
up to 14 recorded door access times.
ASSEMBLY INSTRUCTIONS
6
G