- 13 -
with the brake pedal (the engine must be preheated when the engine is cold).
2. Slowly twist the throttle hand to increase the engine speed to ensure the smooth start of
the vehicle.
3. When the car is moving, use the method of twisting the throttle to control the speed.
4. When the vehicle reaches a smooth running state, the engine speed should be reduced,
and the variable speed pedal should be stepped on, so that the transmission can be put into the
second gear.The other gear of the transmission can be changed in the same way.
5. When you need to stop, loosen the throttle and slow down the speed of the car.
Note:
1. Start with low gear.When the throttle is not released, it is strictly forbidden to change
gears, otherwise it will cause damage to the engine, transmission chain and other parts.The front
brake and the rear brake should be operated in a coordinated manner, so that the brake of the
wheel is not too tight, or the braking effect will be reduced, and the operation of the vehicle will
be difficult to control.
2.
The engine change mode shall prevail in kind.
Brake use
1. When it is necessary to reduce the speed, it is usually necessary to gradually use the front and
rear brakes.
2. In case of emergency braking, the accelerator should be returned to the accelerator, and the
front and rear brakes should be used simultaneously.
Braking instructions:
if the brake or rear brake is used separately, it will not achieve better braking effect;The
emergency brake will cause the front wheel or rear wheel to suddenly stop and make the
motorcycle difficult to control, so emergency braking should be avoided.
In the block
