- 22 -
If the vehicle is stored, remove the negative wire and check and charge it regularly.
Winter (below 0
℃
) after using the motorcycle, battery should be stored in a higher
temperature (20
℃
) indoor.
Replacement of insurance inserts
Insurance insert specification: voltage, current 10A.
If the fuse is frequently broken, it
indicates that there is a short circuit or
overload in the electrical system.
Please contact the dealer or
maintenance station for inspection.
(it can also be installed with
"self-restoring current protector" as
required)
Warning
: the replacement insurance
insert should be in accordance with the same specification as shown in
the picture. Other conductive materials should be prohibited to replace
the insurance insert, and the ignition switch (OFF) should be turned OFF
before the short-circuit accident occurs.
When replacing the insurance insert, first open the cover up and
remove the damaged insurance plug.
Replace the backup insurance cartridge with the new insurance
cartridge and press the cover to the bottom.
Rear brake light switch adjustment
Rear brake light switch ① is located on the right side and right side of the engine.
The adjustment method is: if the brake light is too late, it will adjust the letty② turn
clockwise.
If the brake lamp is bright too early, the adjusting nut will turn anticlockwise.
The vehicle clean
In order to protect the exterior quality of the car, clean the car
regularly and check for damage, wear and leakage.
Note:
After cleaning, rinse with plenty of clean water
comprehensive cleaning, rim, ignition switch, electrical switch,
instrument, export hub, muffler, tank bottom should not be in
areas such as the high pressure spray cleaning, otherwise it will
damage the local;
Dry the motorcycle, start the engine, let it run for several minutes;
Insurance insert
Take out the direction of
the backup insurance insert
Spare insurance inserts
