7. OPERATION
91
7.8.1 MANUAL CUTTING PAGE
7.8.1.1 General Properties
When the manual cutting button is pressed, the following page appears.
( FIGURE – 20 )
In manual cutting mode, the desired part size and cutting angles are entered manually.
7.8.1.2 Cutting Length and Angle Setting
The length of the part to be cut is entered in the length field.
For fixed head angle adjustment, the angle settings on the left side of the
screen are used.
For moving head angle adjustment, the angle settings on the right side of the
screen are used.
45º and 90º cutting angles can be entered by pressing the ready buttons on the
screen.
For example; if you want to cut a piece of length 2206 mm by 45º, the length value is entered as
shown below
( FIGURE – 21 )
, the left side is set to 45º and the right side is set to 45°.
º Press the go button to measure button on the screen or go to Measure button on
the control panel to send the machine to the cutting dimension.
FIGURE – 20
Содержание DC 550
Страница 1: ...www yilmazmachine com tr ...
Страница 61: ...7 OPERASYON 60 ...
Страница 118: ...7 OPERATION 117 ...
Страница 175: ...7 ОПЕРАЦИЯ 174 ...