YILMAZ ACK 420, Руководство пользователя

Страница: 58 / 61

10. TROUBLESHOOTING GUIDE 57
Here are some recommendations for solving urgent problems. If the trouble cannot be solved, or if you have a problem other
than those described hereunder, please contact our technical service or your nearest dealer.
TROUBLE CAUSES REMEDY
Low surface quality (at aluminum and
similar materials) ,
Rough surface ,
Large chip ,
Not homogenous surface ,
Saw blade traces visible
Not cooling the saw blade surfaces
Lubricating the saw blade cutting
surfaces,
Using of cooling liquid
Using of damaged or blunt saw
blade Check the saw blade teeth. Replace if
necessary.
Saw blade moves to quick
The cutting speed is too high for the
material. Decrease the cutting speed.
Motor does not work
( Start button is pressed, not working )
No power supply to the machine.
Check the electric cable connections.
Check the electric power sockets.
Motor is working but the pneumatic
clamp pistons do not work.
The air supply connections are
missing, or the air pressure is too
low.
Check the air compressor connections.
Adjust the air pressure between 6-8 Bar
on the conditioner.
The saw blade rotates in reverse
direction.
The electric connection, the power
cable or the connection at the
panel is wrong.
Let the electric connections carry out
by a qualified electrician.