YILKAR YK 120 S, Инструкция по установке

Страница: 31 / 44

27
B+
To protect the air conditioner, an additional terminal box set is used. The fuse box
should be installed in an easily accessible area.
Place the 80A fuse in the area of the bolts in the fuse box.
Pass the M6 wire end of the 16 mm B+ cable in the mounting kit to one side of the
fuse. Place the other M8 cable end on the (+) terminal of the vehicle's battery.
Pass the M6 wire end of the 16 mm B+ wire to one side of the fuse. Place the other
M8 cable end to the (+) pole of the relay board of the air conditioner.
D+/ACC
Complete the assembly of the cabinet set by
attaching the nuts with M5 washer.
Finally, connect the D+/ACC signal received
from the vehicle's alternator with cable 1 via
single sockets.
CABLE
NUMBER 1
// //
BATTERY
RELAY
BOARD
B+
EN