M230 Series User Manual
11
58.5
35
28
28
22
8
25
Ф
3
Ф
5
4
Installation of SIM/UIM card:
Firstly power off the IP MODEM, and press the out button of the SIM/UIM card outlet with a
needle object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into the
card sheath (Pay attention to put the side which has metal point outside), and insert card sheath
back to the SIM/UIM card outlet.
Warning:
Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the IP MODEM tightly.
Warning: The antenna must be screwed tightly, or the signal quality of antenna will be influenced!
Installation of cable:
Insert DB9F end of the RS232/RS485 data cable into the DB9M interface of IP MODEM,
and connect the other end with user
’
s device.
The signal connection of the RS232 data cable is as follows:
DB9F
DB9F
RS232 data cable
1
RXD 2
TXD 3
4
GND 5
6
7
8
9
1
2 RXD
3 TXD
4
5GND
6
7
8
9
