YewdaleDefiant
®
Manufacturing instructions
Part no: 2006
6
Manufacturing Instructions
YewdaleDefiant
®
cassetted blinds (C40-120)
1
.
Ensuring the head box/fascia profile is square within the saw, cut the head
box to size.
2
.
Ensuring the head box cover is square within the saw, cut the head box to
size making sure there is no distortion.
N.B It is critical that the profile is cut square to enable the cover to close.
3
.
Cut barrel, bottom bar, fabric and side channels to size.
4
.
File all aluminium cuts.
5
.
Attach fabric to barrel and bottom bar inserting the bottom bar end caps.
6
.
Attach fabric retaining pips every 400mm on both sides of the drop of the
fabric.
7
.
Insert the transition plates into the head box and attach the end plates
using 933010 screws.
8
.
Cut the chain to length and attach to control mechanism.
9
.
Making sure the control is on the correct size, insert the control mechanism/
pin end into the barrel and place barrel and fabric into the head box.
10
.
Using the punch provided, punch a hole in the head box cover to enable the
chain to enter/exit the head box by:
a) Place the template on the control side of head box cover and mark the
hole for the chain guide using a pencil (template should be pushed firmly
against the lip on the cover).
C40-120 Cassetted Blinds:
Use this
hole on the
template
