Yetti fish house, Руководство пользователя

Страница: 27 / 42

27
Raising Your Manual Yetti
Start the raising process at the tongue. Connect the coupler to the tow vehicle. Do not raise the front at
this time.
Move to
the driver’s side wheel assembly, and ensure that the ratchet is engaged by moving the ratchet
lever to its upward position. Review that the cable is correctly positioned on the cable rollers. Wind the
winch until the Yetti is half way raised
Move to pa
ssenger’s side wheel assembly, and ensure that the ratchet is engaged by moving the ratchet
lever to its upward position. Review that the cable is correctly positioned on the cable rollers. Wind the
winch until the holes in the shackle and leaf spring line up. Insert the safety pin and safety clip.
Move
the ratchet lever to the downward position and unwind the winch until there is no pressure on the
cables. You need to leave enough slack in the cables to pinch them together
. Move the ratchet
lever to the upward position for towing.
Move back to the driver side wheel assembly and complete the raising process as you did on the
passenger’s side.
Move back to the tongue. Wind the winch until the top pin holes line up. Insert the safety pin and clip.
Move the ratchet lever to the downward position and slightly unwind the winch to produce a small amount
of slack in the cable. Reconnect the safety chains; light connection; brake connections (as needed) and
engage the coupler locking mechanism. In the engaged position, the locking mechanism securely holds
the coupler to the hitch ball.
Insert a pin or lock through the hole in the locking mechanism.
Be sure the coupler is all the way on the hitch ball and the locking mechanism is engaged.