Yetter 5000 SERIES, Руководство пользователя

Страница: 12 / 24

12
ASSEMBLY INSTRUCTIONS
Step 6: Slide the roller mount tubes to align the row center with the traction bars. Fully tighten all hardware at this time to
torque spec. The traction bars DO NOT have to be directly centered under each row.
LOCK UP
To “lock up” the Devastator roller, lower the head down far enough to install a rod through the hole in the mount bracket, in
front of the pivot arms. A 5000-430 Lock Pin can be ordered to lock up the devastators. 6 row heads require 1 lock pin, 8/12
row heads require 2.
OPERATION
CORN HEAD ANGLE NEEDS TO BE ADJUSTED BETWEEN 22 – 25° FOR OPTIMUM
DEVASTATATOR PERFORMANCE. USE THE 5000-455 TO CHECK CORN HEAD ANGLE:
- Put the combine on a level surface. Lower corn head to your normal working head height.
Place the magnetic protractor on the stripper plate to get the angle. Adjust the feeder
house as needed, fore or aft, to achieve 22 – 25 degrees.