18
eccentric adjustment
setuP
GeoMetrY
eccentric aDjustment
slightly loosen the eccentric mount bolts
with a 5mm allen key. the bolts only need to be just loose enough to
spin the eccentric.
setuP Overview
the 303 Dh has the ability to change the geometry of the bike via the eccentric mount.
the geometry can be adjusted from a 64 degree head angle / 14 inch bottom bracket height through a 66
degree head angle / 15 inch bottom bracket height.
1
eccentric aDjustment
place a 6mm allen key into the pivot pin
as shown. rotate the eccentric to the desired position. the eccentric
adjustment has a range of 64˚/14” - 66˚/15”.
2
eccentric aDjustment
once the eccentric mount is in the desired
position secure the mounting bolts.
torque: 125-150 inch/lbs
3
