18.
19.
Fit the housing from the rear shifter across the head tube and down the cable stops on the top of the down
tube. there are two cable stop groups on the top of the down tube to which housing and brake line can be
attached, each with two positions to secure housing. Use the position closest to the drive side of the frame
for the rear derailleur housing and secure the line with zip-ties. next route the housing internally through the
drive side seatstay. work the housing through the two holes on the bottom of the drive side seatstay and
loop into the rear derailleur to finish.
Caution: the failure to properly route shifter housing can cause malfunction of the shift mechanism and
unexpected shifting of gears.
Fit the housing from the front shifter across the head tube and onto the cable stops on the bottom of the top
tube. there are two cable stop groups on the bottom of the top tube to which housing and brake line can be
attached, each with two positions to secure housing. Use the position closest to the drive side of the frame
for the front derailleur housing and secure the line with zip ties. next, run the housing down the drive-side of
the seat tube and attach to the single cable guide located just above the derailleur. attach to the derailleur to
finish.
the rear brake line loops across the head tube and runs down the cable stops on the top of the down tube.
Use zip ties to secure the line to the position closest to the non-drive side on the cable guides. next, run the
line between the non-drive side of the swingarm and the upper link and across the two single cable guides
on the bottom of the non-drive seatstay. secure the line to the guides with zip ties. ensure the line is finished
on the inside of the seatstay when attached to the caliper body. this will prevent the brake line from being
compromised if the bike or rider falls.
Cable setup
the sB66 has full cable housing. By using full cable housing, we have eliminated break points
in the line of your shifter housing. this allows riders to experience better overall shifting
performance by reducing the entrance of unwanted elements such as sweat and sediment.
Use of full cable housing helps prevent corrosion from the elements and keeps the shifting
smoother for a longer period of time.
the staff at yeti are sold on riding with a height adjustable seat post so we included specific
cable guides for the post’s line on the sB66. run the line from your remote along the guides
on the bottom of the top tube in the position closest to the non-drive side of the frame for a
clean set-up. if you haven’t tried a dropper on your sB66, we strongly recommend you do, as it
makes trail riding even more fun.
yeti tips
01. rear derailleur
02. front derailleur
03. rear brake
