YesCam Yes727, Руководство пользователя

Страница: 9 / 58

Outdoor Mega-pixel IP Camera
9
The major components on the back panel and bottom of the IP CAM products are the
followings:
1. Power and Ethernet jack
– use the accompanied splitter cable to connect to power
adapter and Ethernet network. You could also extend the cable by using the
accompanied RJ45 coupler as shown in Fig.2-3. The power needed for this IP
CAM is 12V/1.0A, please make sure you are using the correct power adaptor.
When the Ethernet link is ok, the Ethernet indication LED on the front side will be
blue light.
2. Microphone
– for receiving the audio/voice. Effective distance is about 5 meters.
3. Micro-SD card slot
– for inserting the micro SD-Card. (support up to 32G bytes)
4. WPS button
– for the setup of the WiFi connection with WPS function.
5. Reset button
– this is the button to reset the IP CAM to default factory settings.
You need to use a small stick like pencil or tooth stick to press the reset button for
more than 3 seconds to enable the reset function. Usually when you forgot the
administrator account, you will probably need to do this reset action to reset to the
default factory settings. Please refer to section 3.19 for more details.
Figure 2-2: Major components in the back panel