WWW.YES-RC.COM
4
- Batteries that are not expressly stated by the manufacturer to be suitable for the currents the
charger delivers during the charge process.
Introduction
Thank you for purchasing the I-PEAK 665 Charger by YES. This product is a rapid charger with
a high performance microprocessor and specialized operating software. Please read this entire
operating manual completely and attentively before using this product, as it covers a wide range
of information on operating and safety.
Specifications
Operating voltage range:
DC 11.0 - 18.0V
AC to DC adaptor (DC11.0-18.0V/5A)
Circuit power:
Max. charge power 50W
Max. discharge power 5W
Charge current range:
0.1 - 5.0A
Current drain for balancing Li-Po:
300mAh/cell
NiCd/NiMH battery cell count:
1-15 cells
Li-ion/Polymer cell count:
1-6 series
Gel cell battery voltage:
2V - 20V
Weight: 277g(Net
Weight)
Dimensions:
133 x 87 x 33mm
Special features
Optimal operating software
I-PEAK 665 features the so-called AUTO function that set the feeding current during the process
of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which
may lead to an explosion due to the user’s fault. It can disconnect the circuit automatically and
alarm once detecting any malfunction. All the programs of this product were controlled through
two way linkage and communication, to achieve the maximum safety and minimize the trouble.
All the settings can be confi gured by users!
Internal independent lithium battery balancer
I-PEAK 665 employs an individual-cell-voltage balancer. It isn’t necessary to connect an external
balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, I-PEAK 665 can monitor and balance each cell of the battery
individually. Error message will be indicated and the process will be ended automatically if the
voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
I-PEAK 665 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new
LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas
‘store’ state can control the fi nal voltage of your battery, so as to store for a long time and protect
useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the
Delta-peak voltage detection. When the battery’s voltage exceeds the
threshold, the process will be terminated automatically.
