YES© - UNIVERSAL POWER ENTERPRISES LTD
2-6 Granville Road
Albion Plaza, 11/F, room 1105
Tsimshatsui, Kowloon
HONG KONG
Tel: (852) 2721 0127
Fax: (852) 2721 3711
sales@ upe-hk.com
WWW.YES-RC.COM
The output is connected to a battery with incorrect polarity.
Erroneous selection of voltage of Lithium pack, please check the volt-
age of the battery pack.
The voltage of the battery pack has been selected incorrectly!
This will be displayed if the unit detects a break in the circuit between
the battery and output or if the battery is voluntarily disconnected during
the charge process.
There was a short circuit at OUTPUT.
Voltage of one cell in the battery pack is too low, please check the volt-
age of each cell.
Voltage of one cell in the battery pack is too high, please check the
voltage of each cell.
Wrong connection of the connector detected; please check the connec-
tor and cable.
The charger has malfunctioned for some reason. Seek professional
advice.
The processor detects that the battery has dropped below the minimum
voltage during the charge process.
The voltage is higher than which is set. Please check the number of
cells in the battery pack.
The internal temperature is too high, please cool down.
The processor cannot control the feeding current, please repair it.
CONNECTION BREAK
SHORT ERR
BATTERY VOLTAGE
CELL LOW VOL
BATTERY VOLTAGE
CELL HIGH VOL
BATTERY VOL ERR
CELL CONNECT
BREAKDOWN
BATTERY CHECK LOW
VOLTAGE
REVERSED
POLARITY
INPUT VOL ERR
VOL SELECT ERR
BATTERY CHECK
HIGH VOLTAGE
TEMP OVER ERR
CONTROL FAILURE
Error messages and warnings
This charger incorporates a variety of functions for protection, these monitor the system to verify
processes and the state of the electronics.
In case of an error the screen will display the cause of error and emit and audible sound.
