YELLOWRIVER YR-P0354S, Руководство пользователя

Страница: 3 / 8

Safety Instruction
 Please conserve this manual as operation guidance. If you sell this product to
other user, please make sure that they also receive this user manual.

Always make sure that you are connecting to the proper voltage and that the line
voltage you are connecting to is not higher than that stated on the decal or rear
panel of the fixture.
 If the fixture is intended to indoor use only. To prevent risk of fire or shock, do not
expose fixture to rain or moisture. Make sure there are no flammable, explosive
or corrosive materials surrounded in 10meters while operating.

The unit must be installed in a location with adequate ventilation, at least 5m
away from adjacent surfaces. Be sure that no ventilation slots are blocked.
 Some fixture may carry high heat, do not aim at objective more than 2minutes.

Safe rope should be used to install machine. Bearing of safe rope should be
more than 3times of the machine weight.

Always disconnect from the power source before servicing or replacing
fuse/lamp and be sure to replace with same fuse/lamp size and type. Cut off
power before moving, repairing and cleaning the machine.

To avoid electric shock, all fixtures must be connected to circuits with a suitable
earth connection.

Always secure fixture using a safety chain and carrying handles.

Do not operate at ambient temperatures higher than 104
℉
(40
℃
).

In case of failure or mis-function occurred, stop using immediately. Never try to
repair the fixture by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical
assistance center. Buy the same spare parts/components from manufacturer
directly.

Make sure the power cable is never crimped or damaged.

Avoid direct eye exposure to the light source while it is on.

Do not power on and power off the fixture frequently

When use DMX controller, please make sure that there is no interference
sources(e.g. intercom, high frequency radio waves and radiation source)
Caution! There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs yourself. In the unlikely event your unit may require service, please contact
your local distribution or after-sale service center.
Section 2. Set Up
 Installation
 Controlling Board

Machine connection
Installation

This machine should be mounted through the screw holes of truss. Safety
rope is a must to fix fixture well. Make sure truss and safety rope have strong
load capacity to bear more than 3 times of machine weight .

This machine should be installed by qualified technician.
For your safe
，
please read this user manual carefully before turn on
the fixture. This machine should be operated by qualified engineer
！