YELLOWRIVER YR-380BSW, Руководство пользователя

Страница: 7 / 29

6
Installation requirement
1. The product shall be free from corrosive vapors and gases in the operating environment
and shall not contain inflammable and explosive articles.
2. Keep the distance between the light outlet direction and the subject at least more than 3
meters.
3.The direction of the light is an optical lens. No external force can hit the glass in the process
of operation. If the lens is damaged, it can only be used after the professional technician
replacing the lens of the same specifications .
4. When the outer cover of the power cord is damaged, it must be replaced with a new power
cord of the same specification by relevant professional personnel before use.
5.When the product is hung and installed, the load bearing of the hanging device shall be at
least 3 times greater than the weight of the product, and the safety rope shall be fastened on
the auxiliary hanging device of the lamp, and the load bearing of the safety rope shall be
more than 3 times greater than the weight of the product.
6. The lens and light source of this product must be fully used together. When any part is
damaged, it shall be replaced by relevant professional personnel before it can be used again.
7. In the operating environment, it must be determined that the current voltage provided is
within the range required by this specification
Well grounded.
8.When changing the light source, disconnect the power first, open the head plastic cover,
and open the bracket of the light source area, and change the light source with the same
specification .
The company reserves the right to amend this product manual without prior notice
Controlling Board