YELLOWRIVER YR-380BSW, Руководство пользователя

Страница: 17 / 29

16
Select light up after power on,after power on,wait for 30s to let the bulb fully
initiate,start reset after bulb’s internal voltage is stable enough,if voltage is
stable,recommend to select “light up after power on mode”
When the machine cannot adjusted to its position,please check if shut down the
“optocoupler revise”.
After unplug the signal cord,if the fixture’s position is not output as
intended,please check the set of “data-hold”.
2.6 status information
Display information status of all motors and signals in
the fixture
Hall Not displayed, indicating that the motor
has no Hall correction, 0 means the
motor leaves the correction position, and
1 means the motor is in the correction
position.
status Display motor reset completion status
Pan Display real-time position values of pan
optocoupler feedback
Motor
information
Tilt Display real-time position values of tilt
optocoupler feedback
on
Light up
after
reset Reset the machine after 3s’ power on ,then
light up.
Manual
light up When complete reset,light up by menu or
manual console
Factory
Settings The confirmation box pops up, and after selecting
"SURE", the lamp parameters return to the factory
Settings