YEC YZF-R6 SS KIT 2004, Руководство пользователя

Страница: 8 / 73

– 4 –
4. Remove the cylinder head cover, then the four collars fitted in the head cover, and
install the PIN (93608-16M16).
5. After removing the hose that was connected from the air-cut valve assembly to the
air filter case, push in the plug (90338-08026) on the air filter side to clog up.
4. Head Gaskets
•
The standard gaskets have a thickness of 0.60 mm.
•
These gaskets are used to adjust squish height. They are normally used at a squish
height of -75 (0.45 mm). In the case of machining the cylinder (upper case), always
make sure to measure the squish height and select the gaskets so that it is 0.60 mm
or more.
NOTE:
Squish height refers to the clearance between the flat surface of the piston and the
surface along the head cylinder.
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 5SL-11181-70 GASKET, HEAD CYL. 1 t=0.40 mm
2 5SL-11181-75 GASKET, HEAD CYL. 1 t=0.45 mm
3 5SL-11181-80 GASKET, HEAD CYL. 1 t=0.50 mm
4 5SL-11181-85 GASKET, HEAD CYL. 1 t=0.55 mm
WWW.PlandeGraissage.ORG