YEC YZF-R6 SS KIT 2004, Руководство пользователя

Страница: 32 / 73

– 28 –
C: Location for water temperature display and unit conversion
The ECU in the kit has an additional function of displaying the water temperature in the
speed display area.
CAUTION:
This function assumes that speed is displayed in the “km/h” unit on the meter.
If the meter displays speed in miles, perform the following steps and change the speed
display.
1. Turn on the main switch.
If the clock is displayed in the distance/clock area, press the “SELECT” button for
more than a second to change it over to the distance display.
2. Holding down both the “SELECT” and “RESET” buttons for more than 2 seconds
changes the speed display from “mph” to “km/h”.
3. When the main switch is turned off, the settings will be stored in memory, though a
disconnected battery nulls it and brings the display back to the original “mph”
display.
Switching over the water temperature display
1. Turn on the main switch with the “RESET” and “SELECT” buttons held down.
“Co” appears in the left of the display area for the distance and time.
2. Press the “SELECT” button. The display changes to “dIAG “.
3. Press both the “RESET” and “SELECT” buttons at the same time.
“d01: xx” appears in the display area. (A certain number is displayed in “xx”.)
4. Pressing the “RESET” button 2 times displays “d62: xx”.
The “xx” in “d62: xx” indicates which thermometric scale to display, Celsius or
Fahrenheit.
“00” = No display
“01” = Celsius (°C)
“02” = Fahrenheit (°F)
To change the display, operate the engine switch “OFF”
→
“ON”. The thermometric
indication changes in order of “00”, “01”, “02”, and back to “00” and so on.
5. When the desired scale appears, turn off the main switch.
CAUTION:
Even when water temperature is displayed in the speed indication area, the figures in
the distance display area will be changed though they do not represent the actual
distance traveled.
D: Self-diagnosis function
The ECU in the kit is designed to display the code number on the STD meter
corresponding to the failure occurring to the sensors and switches.
For these code numbers, refer to Table 1.
WWW.PlandeGraissage.ORG