YEC YZF-R6 SS KIT 2004, Руководство пользователя

Страница: 36 / 73

– 32 –
19.Wire Harness Set (5SL-F2590-70)
•
Do not remove the AC generator but leave it to function. Using the battery alone will
result in the inability to run in a short time.
•
This harness enables the meter to light up when the main switch is turned on.
•
The circuit to the oil level gauge and the fuel sender need not be connected, though
the oil warning light and fuel warning light come on. But there will be no problem
with a run.
* Use STD parts for the following.
Engine stop switch
Relay assembly
Emergency stop switch
Battery positive lead
Battery negative lead
CAUTION:
When installing the emergency stop switch, take care to insert the coupler straight in so
that the terminal is not bent.
Other functions
•
Combination with the ECU in this harness kit enables the engine stop switch to be
used.
Attach the switch between the black leads or between the black/yellow (BY) and the
black (B) lead, which are shorted on the white 3-pin coupler under the tank.
When the switch is on, it cuts ignition, but note that it does not function when
transmission is running.
•
When the black 2-pin coupler located under the seat is removed, the ECU control data
changes to the ST specification. Note, however, that the engine stop switch functions
only with the STD transmission.
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 5SL-82590-70 HARNESS ASS'Y 1
2 5FL-83976-70 SWITCH, MAIN 1
WWW.PlandeGraissage.ORG