Yeastar Technology NeoGate TA410 Скачать руководство пользователя страница 5

Страница: 5 / 55

TA410/810 User Manual

Application Description

Connect IPPBX and TA FXO Gateway

YeastarTA FXO gateway is a solution to extend FXO ports for your IPPBX.

Two modes are available for you to connect IPPBX and TA FXO gateway, we call

them VoIP mode and SPS (Service Provider SIP)/SPX (Service Provider IAX) mode.

Three modes are available for you to connect your SIP server and TA410/810

gateway. We call them SIP Account Mode, VoIP Mode and SPS (Service Provider SI

Mode. You can choose any one of the 3 modes to connect your SIP server and

TA410/810. SPS Mode is recommended.

Account Mode:

Create one SIP account on TA410/810, and take the SIP account to register one SIP

trunk on your SIP server. Then TA410/810 and your SIP server are connected by the

account.



Calls from SIP to PSTN

1) Create one outbound route on your SIP sever, and select the SIP trunk you

have registered just now.

2) Configure a “IP->Port” route on TA410/10, choose the SIP account in the field

“Call Source”, and choose a PSTN trunk or PSTN trunk group in the field “Call

Destination”.

3) Make a call from your SIP Server and the call should match the outbound

route dial rules.



Calls from PSTN to SIP

1) Create an inbound route on your SIP server, and select the SIP trunk you

have registered just now.

2) Configure a “Port->IP” route on TA410/810, choose a PSTN trunk or PSTN

trunk group in the field “Call Source”, and choose the SIP account in the filed

“Call Destination”.

When a call comes to

PSTN trunk on TA410/810, the call will be routed to the

destination of the SIP server inbound route.



Register SIP account on IP phone

With account mode, you can directly take the SIP account to register on your SIP

phone or softphone; then make calls from softphone though PSTN trunk on

TA410/810 and receive incoming calls on your SIP phone or softphone. In this

way, you don’t have to set up any SIP server.

VoIP Mode

Take a SIP account from your SIP server, and register it on TA410/810 as a VoIP trunk.

In this way, TA410/80 and your SIP server are connected.



Calls from SIP to PSTN

5/55

Содержание NeoGate TA410
























































Результаты поиска

Содержание NeoGate TA410

Отзывы:

Похожие инструкции для NeoGate TA410

Бренды по названию

Популярные бренды

Yeastar Technology NeoGate TA410, Руководство пользователя

Результаты поиска

Содержание NeoGate TA410

Отзывы:

Похожие инструкции для NeoGate TA410

Бренды по названию

Популярные бренды