N412 Administrator Manual
77
Auto Recording
This chapter explains how to configure auto recording on N412 and how to manage
the recording files.
Store Recordings to Network Disk
Auto Recording Settings
N412 supports auto recording for an established call. Go to
System→ Auto
Recording
Settings→ Recording Settings
to configure auto recording settings.
Note:
before enabling call recording, please make sure that the TF card or the Net
Disk performs well.
Table 15-1 Auto Recording Configurations
General Preferences
Enable Call Recording
Enable or Disable Auto Recording feature.
You can choose:
Record Inbound calls
Record Outbound calls
Record Internal calls
Storage Location
After enabling Call recording, you can choose where to
store the recordings, in the Network Disk or in the TF
card.
Status: shows if the TF card or Network Disk is
successfully mounted to N412.
Record Inbound Prompt
If Call Recording is enabled, the caller will hear the
pre-configured prompt when the inbound calls go through
trunks.
Written to the Recording file:
If enabled, the prompt will be recorded.
Record Outbound Prompt
If Call Recording is enabled, the callee will hear the
pre-configured prompt when the outbound calls go through
trunks.
Written to the Recording file:
If enabled, the prompt will be recorded.
Apply To
Record Trunks
When ticked, all calls through the selected trunks will be