N412 Administrator Manual
80
4.
Input the Net-Disk information in
―Connect to Network Disk‖ tab.
Figure 15-4 Connect to Network Disk
Table 15-2 Network Disk Settings
Network Disk Settings
Running Status
Shows if the Net-Disk is successfully mounted to N412.
Enable
Yes: Enable Network Disk
No: Disable Network Disk
Net-Disk Host/IP
Set the IP address where the recordings will be stored.
Net-Disk Share Name
The shared folder name where the recordings will be
stored.
Net-Disk Access User Name
The User name used to log in the Network share.
Leave
this blank if it is not required. In general, you use the
administrator account on PC as a user name here.
Net-Disk Access Password
The password used to log into the network share.
Leave this blank if it is not required.
If the configuration is correct, you will see the Network Disk information.
Figure 15-5 Network Disk Status
Share Recordings
Users could share recordings on the network. This setting is only applied to the Call
Recording folder in the TF Card. Go to
System→ Storage Management→ Network
Disk Settings
to configure the sharing settings.