N1 Installation Guide
4
2.2 N1 Rear Panel
Figure 2-2 N1 Rear Panel
Table 2-2 N1 Rear Panels
–Port Description
Port
Description
Reset Button
Press for 10 seconds to reset the system.
Console Port
Used for service and maintenance.
SD Card Slot
Insert the SD card and store the recording files.
LAN Port
10/100 Base-TX, connect one end of a RJ-45 Ethernet cable
into the LAN port.
WAN Port
10/100 Base-TX, connect one end of a RJ-45 Ethernet cable
into the router or switch.
USB Slot
Reserved.
Expansion 1-8
Connect Yeastar VoIP gateways to the expansion ports.
Power Switch
Power on/off the device.
Power Inlet
For connection of power supply.
LED
LED Status
Description
Expansion 1-8
Solid Green A device is connected to the expansion port.
Off
No device is connected to the expansion port.
EXPANSION
RESET
SD
CONSOLE
LAN
WAN
USB
POWER SWITCH
POWER INLET
