Yealink Yealink SIP-T20P, Быстрый старт

Страница: 8 / 38

4
E
N
G
L
I
S
H
Basic Call Features
Placing a Call
Answering a Call
Ending a Call
Call Mute and Un-mute
Redial
Call Hold and Resume
To place a call on hold:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
1. With the handset on-hook, press .
1. Pick up the handset.
2. Enter the number, and then press .
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press .
Note:
During a call , you can alternate between headset, hands-free speakerphone and handset modes by
pressing the
Headset
key or the
Speakerphone
key or picking up the handset. Headset mode requires a
headset connected.
Note:
You can ignore an incoming call by pressing the
X
soft key.
2. Enter the number, and then press .
Pick up the handset.
Press .
Hang up the handset or press .
Press .
Press or .
Press .
Press to enter the
Dialed Calls
list, press or to select the desired call, and then
press or .
Press twice when the phone is idle to call the last dialed number.
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only a call on hold, press .
Press during an active call.